Akai MPC 60 Operator'S Manual Download Page 15

Page: 15 / 228

Section 2: The Basics

2.2 Hooking up your system and turning it on:

To get started using the drum machine section:

1. Connect the power cord to an AC outlet. 2. Connect the STEREO

OUT LEFT and STEREO OUT RIGHT jacks to the inputs of an

amplifier or mixer.

Note: If you are only using the MPC60 as a drum machine right now, you

don't need any other connections. Skip down to the section "Turning the

MPC60 on".

To also use the sequencer section with a single integrated keyboard

synthesizer:

1. Connect the synthesizer's MIDI OUT to the MPC60's MIDI IN 1.

You may alternatively use MIDI IN 2. Both inputs merge together. 2.

Connect the MPC60's MIDI OUT 1 to the MIDI IN of the

synthesizer.

To use the sequencer section with a midi master keyboard and

separate multiple midi sound modules:

1. Connect the MIDI OUT of the midi keyboard to the MIDI IN 1 of the

MPC60. You may alternatively use MIDI IN 2. Both inputs merge

together. 2. Connect the MIDI OUT 1 of the MPC60 to the MIDI

INPUT of the first midi sound module. 3. Connect the MIDI THRU of

the first sound module to the MIDI INPUT of the second sound

module. 4. Connect the MIDI THRU of the 2nd sound module to the

MIDI INPUT of the third sound module, and continue this until all

sound modules are connected.

The above hookup only uses one of the four midi output jacks of the

MPC60. Later in the manual, you'll learn how to use all 4 of the midi output

jacks.

To use the sampling input, foot switches, sync input/output, echo

inputs/outputs, individual mix output 1 - 8, or the metronome output,

please read the corresponding sections of the manual.

Note: the RS-232C computer port currently has no function.

Summary of Contents for MPC 60




































































































































































































































Search results

Summary of Contents for MPC 60

Reviews:

Akai MPC 60, Operator'S Manual, Page: 15 / 228

Search results

Summary of Contents for MPC 60

Reviews: