manualshive.com logo in svg

Akai MPC 60, Operator'S Manual, Page: 125 / 228

Share
Download
Akai MPC 60 Operator'S Manual Download Page 125

 

 

Section 6: Sampling and editing sounds

 

125

 

 

 
 

The SOUNDS key provides access to all functions associated with the 

creation, editing and tuning of drum sounds. When the SOUNDS key is 

pressed, this screen appears: 

Press a single number to select one of the displayed options. The 

screens which follow are described in the following sections. 

 

This section of the manual does not describe the process of loading or 

saving sounds to disk. To learn how to do these operations, consult the 

"Disk" section of this manual. 

 

NOTE: As with all samplers, all sounds are lost when the power is 

removed. This means that you must load in sounds from a sounds disk 

every time the MPC60 is turned on, and you must save any edited or newly 

sampled sounds to disk, or the changes will be lost!

Summary of Contents for MPC 60





































































































































































































































Reviews:

No comments