manualshive.com logo in svg

Akai MPC 60, Operator'S Manual, Page: 150 / 228

Share
Download
Akai MPC 60 Operator'S Manual Download Page 150

 

150 

3. MASTER: 

 

There is a single set of stereo mix settings which is not stored in 

any sequence. If the stereo mix mode is set to MASTER, this 

single set of mix settings is used instead of the sequence settings. 

In this mode, mix settings and changes are not stored to disk 

with the sequence, and if the sequence number is changed, the 

mix settings remain unchanged. In this mode, any mid-sequence 

mix changes (see RECORD LIVE CHANGES field, below), are 

ignored. This option is preferable if you only want the stereo mix 

to change when you manually change it, and not otherwise. 

Further, the master settings are saved to disk whenever a SET file 

is saved, and therefore whenever a SET file is loaded, the stereo 

mix settings from that file are automatically loaded into the 

master stereo mix settings. 

 

 

• The ECHO MIX field:  

The echo mixer may be set in this field to one of two main modes: 

SEQUENCE and MASTER. The function of these two modes is 

identical to that described above in the "Stereo mix mode" field. 

 

 

• The RECORD LIVE CHANGES fields (2 fields):  

There are two of these fields- one each for the stereo mixer and the echo 

mixer. They will only appear on the screen if the corresponding MIX field 

on the same line (STEREO MIX or ECHO MIX) is set to SEQUENCE. 

RCRD LIVE CHNGS is an abbreviation for "record live changes" and these 

are choice fields which have 2 options: NO and YES. If set to YES, all 

changes made to the stereo mixer (or echo mixer) while in RECORD or 

OVERDUB modes are recorded into the active track in real time, just like an 

automated mixer. When played back, the mixer settings will change exactly 

as they did while recording. Further, if either the stereo mixer or echo mixer 

screens are displayed during playback, the graphic mixers will move in real 

time to indicate the live changes. These movements are stored like any 

continuous controllers- as a series of many discrete events (in this case, 

MIXER VOL, MIXER PAN, or ECHO MIX VOL events), and these 

discrete events can be edited in detail in Step edit mode. 

 

NOTE 1: If you use OVERDUB mode to add mix changes to a region of 

the track where previous mix changes exist, the old changes are not erased, 

but rather the new changes will be added in between the old ones, 

producing unpredictable results. For this reason, it is a good idea to record 

your automated mix data on its own separate "drums" track, then always 

use RECORD mode (not OVERDUB mode) to "punch-in" any mix 

changes. This will automatically erase the old changes throughout the 

punch-in region, but since the mix changes are on a separate track, any 

drum notes are not erased. 

Summary of Contents for MPC 60





































































































































































































































Reviews:

No comments