Akai 25CT23FSR, Service Manual

Page: 11 / 46

Use the / buttons on the remote control to highlight an adjustment and the / buttons
to adjust it.
The POS+/-, / / / ,1~6, RECALL, VOL+/-, MUTE and POWER buttons on the remote
control function in the S mode, but 100+, 7, 8, 9 and 0 buttons not.
6.2 Bus data
Table 3 Bus data
Data in S
Mode
Adjustment Description
OP1 7B Option set byte 1 See Table 4
OP2 48 Option set byte 2 See Table 4
OP3 FF Option set byte 3 See Table 4
OP4 F5 Option set byte 4 See Table 4
OP5 36 Option set byte 5 See Table 4
OP6 28 Option set byte 6 See Table 4
AVG Vertical output
INIT Initializing E
2
PROM
TAB Data check sheet See Table 5
VX00 19 4:3
VX50 01 16:9
VX99 38 Zoom
VS Set to the optimum Half vertical output
VA Set to the optimum
Vertical amplitude (When vertical frequency is identified to
50Hz, “5VA” is displayed when identified to 60Hz, “6VA”
displayed.)
SC Set to the optimum S correction
VSH Set to the optimum
Vertical shift (When vertical frequency is identified to 50Hz,
“5VSH” is displayed
when identified to 60Hz, “6VSH”
displayed.)
5OV Set to the optimum
Character field starting position (When vertical frequency is
identified to 50Hz, “5OV” is displayed when identified to
60Hz, “6OV” displayed.)
HP Set to the optimum Parallelogram correction
HB Set to the optimum Bow correction
5HS Set to the optimum
Horizontal shift (When vertical frequency is identified to
50Hz, “5HS” is displayed when identified to 60Hz, “6HS”
displayed.)
5HA Set to the optimum
Horizontal amplitude (When vertical frequency is identified to
50Hz, “5HA” is displayed when identified to 60Hz, “6HA”
displayed.)
( continued )
10