36
Input/Output Icons
—the input and output icons are triangles that together with their
color show all the input and outputs and their status (selected, not selected, input
present or not, for
m
at, etc.). A co
m
plete video path is shown when inputs and outputs
are connected with lines going to/fro
m
the fra
m
ebuffer.
Input/Output Icon
Conversion Icon
—when an input or output is a different standard than the fra
m
ebuffer
then the KONA LHe Plus
m
ay be down-converting the signal to the proper standard.
This
m
ay be auto
m
atic, because it's detected an input signal that differs fro
m
the
standard currently selected, or because you've explicitly told it to convert. In either
case, the block diagra
m
will show the conversion by displaying a conversion icon in
between the input/output and the fra
m
ebuffer.
Down Conversion Icon
If you click on a conversion icon, the Screen will change to the For
m
at screen, allowing
you to view/edit settings.
Color Meanings
—all ite
m
s in the AJA Control Panel block diagra
m
are color-coded to
show what is happening in realti
m
e. This applies to both icons and text. These colors
have the following corresponding
m
eanings:
Blue:
video is sa
m
e for
m
at as the Pri
m
ary For
m
at (fra
m
ebuffer)
Red:
there is no video, the selected operation cannot be perfor
m
ed, or an invalid
selection has been
m
ade
Yellow:
reference video (black burst or other reference source)
Green:
indicates that LHe Plus is perfor
m
ing so
m
e kind of active change to the video, to
m
ake it different fro
m
the Pri
m
ary For
m
at (e.g., down convert).
USO
RESTRITO
