10
SMPTE/EBU N10, Betaca
m
(NTSC), and Betaca
m
(NTSC Japan). These three for
m
ats differ
in level only and are configured in the AJA Control Panel.
Reference Video
A single BNC on the standard KONA LHe Plus cable—or two BNC connectors on KL-box (it
loops through)—allow you to synchronize KONA LHe Plus outputs to your house analog
reference video signal (or black burst). If you have a sync generator or central piece of video
equip
m
ent to use for synchronizing other video equip
m
ent in your studio, then connect its
analog co
m
posite output here. When KONA LHe Plus outputs video it uses this reference
signal to lock to. When connecting a reference video source, the locking signal should be the
sa
m
e for
m
at as the Pri
m
ary for
m
at selected in the AJA Control Panel. It is possible in so
m
e
circu
m
stances to use an alternate for
m
at video signal as long as the basic fra
m
e rate is
co
m
patible.
In This Manual
Chapter 1
is the introduction you’re reading, listing features, and syste
m
require
m
ents.
Chapter 2
provides co
m
plete instructions for installing and configuring the AJA KONA LHe
Plus card. The user is guided through unpacking, installing the card into a Mac or PC, installing
KONA LHe Plus Mac or PC co
m
patible driver software, cabling the syste
m
and then getting it
up and running. I
m
portant configuration infor
m
ation is also provided on video settings and
use of genlock/external reference.
Chapter 3
discusses operational aspects of KONA LHe Plus when used with the AJA Control
Panel.
Chapter 4
discusses troubleshooting proble
m
s with your syste
m
and what to do when there’s
a proble
m
you can’t solve.
Appendix A
presents a list of technical specifications for the product.
The re
m
ainder of the
m
anual consists of an index section to help you rapidly find topics in the
m
anual.
USO
RESTRITO
