1
15
KONA LHe Plus Installation & Operation Guide — Installing the KONA Card
Installing the KONA Card in a Windows PC
1.
Place the PC in a well-lit convenient area, where you will have easy access to the chassis
access door.
2.
Touch the outside of the PC to discharge any static electricity in your body. Re
m
ove the
power cable fro
m
the back of the PC.
3.
Open the PC to gain access to the card slots as described in your Workstation User
Manual.
4.
Re
m
ove the KONA card fro
m
its protective anti-static bag; place the card on top of the
bag.
5.
To install the KONA card and RAID controller card (SCSI or Fibre Channel), refer to the AJA
website for the latest installation updates at the URL provided (see
for link).
Because of hardware and software changes, AJA engineers are constantly testing and grading
workstation perfor
m
ance. The AJA website is your best source of up-to-date approved
workstation configurations.
Note:
Always put the RAID controller and KONA on separate PCI busses. This i
m
proves
perfor
m
ance by reducing bus contention.
KONA Card placement in HP Z800 Motherboard
1
2
3
4
5
6
7
KONA card
HP Z800 Workstation
DIMM 6
DIMM 5
DIMM 4
DIMM 3
DIMM 2
DIMM 1
DIMM 6
DIMM 5
DIMM 4
DIMM 3
DIMM 2
DIMM 1
CPU 1
CPU 2
PCI-e 8x (4x)
PCI-e 8x (4x)
SATA 0 SATA 1
SATA 2
SATA 3
SATA 1
SATA 1
SATA 4 SATA 5
SATA 1 SATA 1
SATA 1
SATA 1
SATA 1 SATA 1
PCI-e 8x (4x)
PCI-e 16x
PCI-e 16x
PCI 33MHz
PCI-e 16x (8x)
USO
RESTRITO
