8
Using KL-box
The KL-box attaches to the KONA LHe Plus card via cables that attach to the back of the KL-
box. These cables are supplied with the KL-Box (one 60-pin to 60-pin, and one 3-BNC to 3-
BNC). When you purchase the optional KL-Box, you get two-channel unbalanced audio
output (2 RCA Jacks)—not available with the standard cable.
Note:
When ordering a KL-Box, ensure that you specify one configured for the KONA LHe
Plus. The KL-Box is also available for other KONA
m
odels but
m
ay use a different cable set.
Separate AJA part nu
m
bers exist for each configuration, so ensure your dealer supplies
you with the correct one.
AJA KL-box Panel Connectors
About BNC
Connectors
Although
m
ost video professionals are used to BNC connectors, you
m
ay not have seen the
m
if you’ve been using pri
m
arily desktop video equip
m
ent. BNC connectors ensure a positive
connection by the act of locking the connectors together via pins in one connector that fit
into slots in the corresponding connector.
To
m
ake a BNC connection, slide the cable connector over the panel connector and then
when seated, rotate the barrel of the cable connector 90° clockwise until the connectors are
locked together. When properly locked, the cable cannot accidentally be pulled out.
RS422
Machine
Control
E
x
ternal
Reference
(loop)
Analog Audio
Output
Balanced Audio In
Channels 1 & 2
Balanced Audio Out
Channels 1 & 2
Composite/
Component
Video In
Composite/
Component
Video Out
AES/EBU Audio
In and Out
In
Serial
Digital
Out
Serial
Digital
Pins (2) on BNC Connector
Align slots in
cable connector
barrel with connector
pins, then slide it over the pins
and rotate the barrel
to lock the connectors
(connector on KL-box)
together
USO
RESTRITO
