24
Installing KONA
Software for
Windows
If your PC has previously had another video capture or
m
ulti
m
edia card installed, re
m
ove the
card and uninstall any related software before installing KONA. Also, always uninstall existing
KONA software before installing a new version. This will prevent hardware/software conflicts.
The installation procedure is described below. You cannot use KONA with third-party
applications until the AJA KONA software has been installed on the host workstation.
If you add KONA supported applications at a later date and have not previously installed the
appropriate plugins, you
m
ust run the install progra
m
again selecting the appropriate
application support software to be installed.
Software Installation Procedure
Locate the AJA KONA Software download or CD ROM packaged with your syste
m
and follow
the procedure below to install the required software on the host syste
m
. The KONA for PC
software is intended for Windows 7 64-bit workstations.
The KONA for PC 10.2 Installation Software is divided into separate installer packages
containing:
•
Retail Drivers and Control Panel applications
•
Plugins for the various third-party applications supported.
The AJA Retail Software package
m
ust be installed first. Next, install the plugin package for
your desired Application Software.
KONA for PC Retail Drivers Installer Package
Note:
Before installing KONA software, turn off any virus protection and security software
that you have installed on your co
m
puter.
This section describes the AJA Retail Software package installation. The subsequent
installations are essentially the sa
m
e but do not require restart of the co
m
puter. Refer to your
specific plugin package Installation Guide.
Double-click on the download package or insert the KONA CD into the PC.
USO
RESTRITO
