F
2
SAT-17T Fusion Splicer Instruction Manual
Warnings
If any following condition happens, please disconnect the AC
power cord from the AC adapter inlet or the wall socket and hold
power button to force power off immediately to ensure the
equipment safety, and contact with maintenance center.
Fuming, un-normal smell, unusual noise, or over-heat.
Liquid or foreign matter falls inside splicer;
Damage or drop occurs.
If this occurs, ask your service center for repair or suggestions.
Please use the original AC/DC adaptor or battery charger which
is supplied by original box. Using any improper and non-
authorized power source may cause fuming, electric shock or
equipment damage, also may result in fire, personal injury or
death.
Please use the original supplied AC power cord and do not place
heavy objects on the AC power cord. Fuming, electric shock or
equipment damage may be caused by improper use or non-
authorized power cord, or personal injury or other fatal
consequences.
Never operate the splicer in the environment where existence of
flammable liquids or vapors, the electrical arc may lead to splicer
at risk of fire or explosion if operated under such occasion.
Do not use compressed gas or canned air to clean the splicer.
They may contain flammable materials and could be igniting the
splicer during the electrical splicing operation.
Do not touch the electrodes when the splicer is in operation. The
electrodes generate high voltage and high temperatures that may
cause a seriously shock or burn for operator. Please turn the
