18
Optical Fusion Splicer Instruction Manual
Function
Description
Quick ARC
Calibration
Mode
If this function is turned on, before splicing,
the fusion splicer will run a quick ARC
calibration
Tension Set
If Tension test is turned on, after splicing,
Tension test will be executed automatically
Reset Waiting
Time
If Tension test is turned off, after opening
cover, the fusion splicer auto to reset waiting
time(Turn on tension test, this can’t run)
Auto Start
If close cover set turn on, after closing the
cover, auto-align and splice
Auto Heating
If close cover set turn on, after closing the
heating stove, fusion splicer auto-heating
5. Preparation Before Splicing
5.1 Strip The Optical Fiber Coating
Use gauze (dipped in alcohol) cotton ball to clean the about
100mm optical fiber. If the fiber is indoor fiber, an indoor fiber
stripper need to used peel it about 40mm. As fig.5.1.1. For other
types fiber, please use the stripper to shear the coating.
