13
Optical Fusion Splicer Instruction Manual
Fig.1.1.2 Battery electricity
Fig.1.1.1 Battery electricity
Panel and Interface Instructions
1. Power Supply
The fusion splicer supports two types of power supply:
a.
Internal battery supply power (no external adaptor is used)
b.
External adaptor supply power (A power adaptor is used)
Note: Please use the standard adaptor which is packed along
with fusion splicer, if use other model of adaptor, may result in
abnormal running.
1.1 External Adaptor Supply Power and Charge
This fusion splicer adaptor input index: wide-range 100-240V,
1A, 50/60Hz. Output index:13.5V, 5A, please must use the
dedicated adaptor. Connect fusion splicer and power source with
adaptor, if battery is installed in the fusion splicer, then the
adaptor is supplying power for fusion splicer and charging for
battery. And an icon as Fig. 1.1.1 will show in the screen upper
right corner. The means the battery is charging, and the
power indictor light will continuously twinkle until the battery is
fully charged.
1.2 Internal Li-ion Battery Supply Power
a.
Battery electricity indicator
Upper right of the screen shows the battery electricity, green
stand for surplus battery electricity. as Fig.1.1.2 shows.
