Unit has been designed to be installed:
•
inside
•
in fixed positions
Limit vibration transmission:
•
use
antivibration
devices on unit bearing/supporting points;
•
install flexible joints on the hydraulic/ aeraulic/cooling
connections.
•
plan in the false ceiling the openings indicated in the
functional clearances to allow the access to the unit for
the maintenance operations
•
Ceiling positioning : let free the projection to the ground
of the unit and of the functional clearances to allow the
access with ladders or other means
Installation standards:
•
Safe accessible position;
•
avoid flood-prone places;
•
verify unit weight and bearing point capacity;
3 - POSITIONING
Operate in compliance with safety regulations in force .
For detailed information (dimensions, weight, technical
characteristics etc.) please refer to the “Technical information”
section.
Use single protection devices : gloves, glasses ecc. .
During positioning consider these elements :
•
technical spaces required for the machine and system
•
place where the machine will be installed
•
electrical connections
•
water connections
•
air / aeraulic ducts
Do not considerer these elements could decrease
performances and operational life of the unit.
3.1 PRELIMINARY INFORMATION
3.2 POSITIONING
A Space to not transmit vibrations min. 20mm.
B Trap door for maintenance ordinary (access to electric
panel and air filter).
C Access for straordinari maintenance.
D Space to not transmit vibrations min. 20mm.
E Space for fan dismantling.
The functional clearances have to :
•
guarantee the unit good operating
•
allow the maintenance operations
•
safeguard the authorized operators and the exposed
person.
•
position the unit taking into consideration the clearances
indicated in the figure.
A
B
C
D
C
B
E
Summary of Contents for DFO 5 - 9 - 17
Page 17: ...6 ELECTRICAL CONNECTIONS 6 3 ELECTRIC PANEL SIZES 5 9 ELECTRIC PANEL SIZES 17 X1 X1 A B A B C2...
Page 24: ...6 ELECTRICAL CONNECTIONS...
Page 43: ...NOTES...
Page 44: ...NOTES...
