MicroMAX Hardware Installation User Guide
Page 73
Commercial in Confidence
UWB-D00068 Rev J
¾
BSDU to DC power supply cable (supplied with the BSDU)
Figure 58 - BSDU to DC cable
16.2 Power Cable Assembly
In the BSDU Kit there are two polarized and genderless unassembled Anderson Powerpole
power connectors:
red
for positive connection and
black
for the negative connection.
Figure 59 - Power connectors (Anderson Powerpole)
The power connectors consist of housing (hood and a contact pins). The contact pin is displayed
below:
Figure 60 - Contact pin
16.3 Housing the Connectors
The power connectors are supplied unassembled. Therefore, you need to crimp the power wires
to the connector's contact pins, and then house them in the Powerpole hood.
Crimping the power wires to the connectors:
1. Insert the wire into the contact pin's barrel, and then, with a standard crimping tool crimp the
barrel tightly onto the wire (recommended 20AWG cable wire).
Figure 61 – Crimped
2. Insert the contact into the hood with the contact's
tongue pointing downwards
and snap
into place. Ensure that the housing spring mates with the underside of the contact's tongue.
Figure 62 - Insertion
