AirHarmony-1000 Installation Guide
UGD-D01006
Airspan Commercial and Internal Use
43
Figure 44: Assemble and tighten
6.3 Wiring AC Power Input Cable
1.
Cut the AC power cable to the required length.
2.
Prepare the ends of the AC/DC
converter cable
and thread the connector parts over the
cable.
3.
Secure the prepared ends of the drop cable into the head part of the connector (female part).
Figure 45: AC/DC converter cable connector assembly
4.
Insert and secure the
white
wire into position
1
and the
black
wire into position
2
and
green
wire into position
(earth ground).
Figure 46: AC/DC converter wires assembled
5.
Assemble the parts of the connector and tighten the gland to provide a waterproof seal.
Figure 47: Assemble and tighten
6.
Fasten the 2 parts of the connector together and tighten to make a waterproof seal.
7.
Position the pins correctly; the connector is secured to the unit with a locking ring that is
screwed into place. Use firm hand pressure only, the connector has a built in sealing ring.
