AirHarmony-1000 Installation Guide
UGD-D01006
Airspan Commercial and Internal Use
8
Note:
When using a front mounted antenna, external antennas cannot be used.
Note:
When using external antennas, the sun-shield must be used.
Table 4: Front Mounted Sector Antenna Parameters
Parameter
2.x GHz
3.x GHz
Frequency
2.3
–2.7
2.3
–2.7
3.3
–3.8
Polarization
Dual Slant ±45
Dual Slant ±45
Dual Slant ±45
Polarization discrimination
18 dB
15 dB
>15 dB
Boresight gain
12 dBi
7.5 dBi
11.5 dBi
Azimuth HPBW
65
90
± 10
65
Elevation HPBW
22
20
22
Electrical tilt
-1
N/A
-1
Grounding
DC GND
DC GND
DC GND
SelectaBeam Multi-beam Antenna
The SelectaBeam SC-800 provides four direction beams and an omnidirectional pattern covering
360
in azimuth. Beam selection is achieved via a digital control interface.
Table 5: Omni Antenna Parameters
Parameter
2.x GHz
Frequency
2.3
–2.7
Polarization
Dual Slant ±45
Polarization discrimination
16 dB
Boresight gain
2.0 dBi
Peak gain
7.5 dBi
Azimuth HPBW
Omni-Directional
Elevation HPBW
20
Electrical tilt
N/A
Grounding
DC GND
AirHarmony-1000 Antenna Usage Options
AirHarmony-1000
comes
in
a
range
of
frequency
variants
that
can
be
mounted
with
different
antenna
options
and
formats. Initially deliveries are of the Front Mount Antenna variant.
A typical sector installation will have a cross-polar sector antenna fitted directly to the front of the
AirHarmony-1000 main unit. (This is attached instead of the sun-shield in other variants - pending).
