AirHarmony-1000 Installation Guide
UGD-D01006
Airspan Commercial and Internal Use
3
3.
This product is supplied with a grounding connection which must be connected. Do not
defeat this important safety feature.
4.
Static sensitive components inside - do not remove the lid or base: No user serviceable
parts inside.
5.
Position the power cord to avoid possible damage; do not overload wall outlets.
6.
Do not place this product on or near a direct heat source, and avoid placing objects on
the terminal.
7.
To avoid electrical shock do not install this device during adverse conditions such as rain
or inclement weather.
8.
Use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners. Disconnect the
power before cleaning.
9.
The units should not be located too near power lines or other electrical power circuits,
where it can come into contact with such power lines or circuits.
10.
The radio transceiver must be properly grounded to protect against power surges and
ac
cumulated static electricity. It is the user’s responsibility to install this device in
accordance with the local electrical codes.
11.
Installation of the AirHarmony-1000 must be contracted to a professional installer.
12.
Disconnect Device. The socket outlet should be easily accessible in case you have to
disconnect the device.
13.
When installed in the final configuration, the product must comply with the applicable
Safety Standards and regulatory requirements of the country in which it is installed. If
necessary, consult with the appropriate regulatory agencies and inspection authorities to
ensure compliance.
Warning of Hazardous Voltages
On AC installations, hazardous voltages exist. Use caution when verifying or working with AC power.
Remove metal jewellery that could come into contact with AC power.
On DC sections, short-circuiting the low voltage, low impedance circuits can cause severe arcing that
may result in burns or eye damage. Remove rings, watches etc. to avoid shorting DC circuits.
Note:
Airspan products do not contain hazardous substances (as defined in UK Control of
Substances Hazardous to Health Regulations 1989 and the Dangerous Substances Regulations
1990). At the end of any Airspan products life cycle, the customer should consult with Airspan to
ensure that the product is disposed of in conformance with the relevant regulatory requirements
.
Adherence to European Directive 1999/519/EC
European Council Recommendation 1999/519/EC details basic restrictions and reference levels on
human exposure to electromagnetic fields as advised by the ICNIRP. Adherence to these
recommended restrictions and reference levels should provide a high level of protection as regards
the established health effects that may result from exposure to electromagnetic fields.
Warning Symbols
The following symbols may be encountered during installation or troubleshooting. These warning
symbols mean danger. Bodily injury may result if you are not aware of the safety hazards involved in
working with electrical equipment and radio transmitters. Familiarize yourself with standard safety
practices before continuing.
Electro-Magnetic Radiation
High Voltage
