AirHarmony-1000 Installation Guide
UGD-D01006
Airspan Commercial and Internal Use
36
Note:
When installing a protection ground take care to use suitable metal combinations
to avoid or minimize galvanic corrosion.
5.7 Installing AC/DC Converter
The AC/DC power converter kit can be optionally supplied by Airspan.
The kit includes the following:
AC/DC power converter with cables on both AC and DC side. The DC side comes pre-
connected to the AirHarmony-1000 DC plug and the AC side arrives with 3 bare wires.
Waterproof cable joiner to connect the AC side with the AC cable
Mounting bracket for pole mounting of AC/DC converter
The AC/DC Converter can be mounted on a pole (with the supplied mounting bracket) or on a wall.
The AC/DC Converter should be mounted in close proximity to the AirHarmony-1000 so as to
facilitate the proper connection.
5.7.1 AC/DC Converter Pole Mount Assembly
The following images show the pole mount assembly.
1. Insert the clamp straps through the slots in the mounting bracket.
2. Position mounting bracket on the pole with notched edges towards the pole.
3. Feed clamp bands through the quick release locking mechanisms and wrap around pole.
Figure 26: Assemble clamp bands (2 required)
4. Wrap the band to properly fit on the pole. Press down locking mechanism with band excess
fed through the mechanism.
Figure 27: Press down locking mechanism
5. Align and position each of the 2 clamps. Tighten the clamp bands with large flat screwdriver in
place.
