5 M600 Installation
5.1 Recommend Tools
-
M2 Hex Driver
-
M2.5 Hex Driver
-
Thread Locker (either mid or high strength depending, recommended Loctite Blue 243)
5.2 M600 Configuration
The Nextcore RN50 has been designed to suit the DJI M600 product. Whilst the RN50 is not
dependent on this product and can be used on other UAV’s please make sure to follow the
recommended user guide of both the desired UAV and the Nextcore product.
The following is an explanation on how to configure the M600 to carry the Nextcore product
and how to configure the DJI API port to enable the auto-capture feature. This section
assumes that you have the Nextcore RN50 M600 mounting kit. Please refer to the DJI M600
user guide and recommended specifications for more details.
5.2.1 Vibration Isolators
Version 1.1
NextCore RN50 User Guide
6
Summary of Contents for NextCore RN50
Page 1: ......