Overlap
This the distance that data from different flight lines can overlap. It is not
recommended to change this setting.
Considerable RAM and CPU are required for this step, but it makes the resulting point clouds
much more consistent in density and easier to work with.
The Auto Calibrate Roll Offsets function is also available to the user. This will apply only if the
user is getting a decimated dataset. This function tries to automatically calculate any roll offset
between flight lines. This is recommended is the data set has a good ground surface, but flight
lines have visible roll errors.
Once run, flight lines with a calculated roll offset will have an asterisk shown next to them.
Pressing the clear roll offsets button will remove this, and it can be recalculated or left as
default.
The system uses a random sampling to calculate roll offsets, so results will vary between runs -
but are normally fairly consistent.
9.4.5 Export Settings
This tab refers to the outputs desired from the software and their location path.
9.4.5.1 Export Paths
By default the desired data will be exported to an exports folder within the individual dataset
directory. This can be changed by copying the desired path into the text box. The user can also
select to export their data into a timed directory. This will put the desired exports into a
Version 1.1
NextCore RN50 User Guide
34
Summary of Contents for NextCore RN50
Page 1: ......
