9.4.3 Flight Line Selection
The nextcore software can process either individual flight line or entire flight as desired by the
user. On the left side of the software interface the flight line selection is presented:
As seen above the mission path of the flight is automatically divided into individual flight lines.
This allows the user to only fuse together data that is necessary to the final deliverable saving
on processing time.
Each flight line is split into different colours and flight line ID’s. This flight line ID is also stored
in the point source id once the laz file has been exported. The automatic detection of flight
lines is controlled by the line split function. Depending on the flight - software may not
automatically detect the correct flight lines, the user can change the line split angle. This is the
minimum angular difference between one line and another. When doing linear scans this may
need to be lowered to account for small flight line direction changes.
Version 1.1
NextCore RN50 User Guide
30
Summary of Contents for NextCore RN50
Page 1: ......
