_______________________________________________________
4800B Series
AP User’s Guide
Quick-Start Setup
DOC-710-005310-A0
9.
Assign an IP address to your Access Point with the “arp” command. Follow these steps:
•
Open a Command Prompt window (usually located on your Start menu under Programs).
•
Type
arp –s
followed by the IP address from your system administrator, followed by the MAC
address from the label on the bottom of the Access Point. Your complete “arp” command might look
like the entry below.
•
Press Enter to set the IP address of your Access Point.
Note:
Windows 95 may require you to include your computer’s IP address in the “arp” command
immediately following the AP’s MAC address. Type
arp
in the Command Prompt window and
press Enter to check the proper command format for your version of Windows.
Your
AP’s IP
The MAC address
from the label on the
bottom of the Access
