Airmax MaxAir 100e P2, Design, Installation And Maintenance Instructions

Page: 5 / 68

Page 5
INTRODUCTION .
The MaxAir(e) ™ line of combo air handlers
is specifically designed for use in residential
and commercial combination space and
water heating systems (Combo Systems).
Combo heating systems use the home’s
water heater or boiler to provide both space
heating and domestic hot water, eliminating
the need for a furnace.
Combo heating systems are ideally suited for
single family homes, townhouses and
apartments where the use of a furnace may
not be feasible or where space requirements
are limited. They can also be used for
additions, renovations, and finished
basements as a replacement for, or in
addition to the existing heating system. Our
air handlers are the smallest units available in
their capacity range.
The MaxAir(e) ™ line of air handlers are
designed to take the guess work out of
system sizing and installation. Matched
specifically to common water heater and
boiler sizes, our air handlers can be quickly
sized using the quick sizing information in our
Equipment Sizing Manual . For applications
requiring special consideration, our detailed
sizing method gives you the ability to size the
air handler to ANY operating condition. Call
for answers to any questions related to sizing,
installation or trouble-shooting for any of our
air handlers or water heaters.
We provide you with the quietest operating
air handler available. By using large capacity,
high output heating coils, our product delivers
more heating per volume of air than any of
our competitors, which means warmer
delivered air temperatures. Our blower fans
are also the widest available in their size
range, which translates into slower fan
speeds to deliver the same amount of air. All
these features add up to warmer, more
comfortable air, quiet operation, and a
satisfied customer.
Water heaters, boilers and air handlers can
be purchased from a wholesale supplier,
rented from your Gas Utility, or purchased
from
Airmax Technologies as part of a
complete heating package.
Benefits of the MaxAir(e) ™ Mini Ducted
systems are:

Vents can be located in low traffic areas
on the floor, walls, or ceiling, or in a kick
space.

A HVAC tradesman can install a system
using these design and installation
instructions.

Small diameter supply ducts eliminate the
need for large sheet metal ducting and
allows smaller bulkheads.

Can be installed in existing structures with
minimal structural changes.

Provides a quiet, draft free environment.
MaxAir(e) ™ Mini Ducted systems
applications:

Retrofit construction to add heating,
cooling, humidification, or filtration to a
building.

New construction to deliver air throughout
the entire building envelope (eg. services
3 story townhouses more effectively than
conventional furnaces).

New and retrofit construction to reduce
bulkhead sizes required for duct work.