Page 27
a.
“PUMP TMR ON”:
The Pump RELAY Timer functions normally and will activate per
paragraph
B. a.,
above.
b.
“PUMP TMR OFF”:
The Pump RELAY Timer is disabled and will not activate.
D.
NORMAL &TEST MODE TIMING (SW3-2 "TEST"):
NOTE: THIS SWITCH SELECTS NORMAL OPERATION OR THE TEST MODE
PUMP SWITCH (A1, A2, A3) TIMING AND FUNCTION LOCKOUT.
THE FOLLOWING DIAGRAM SHOWS THE TIMING OF THE PUMP RELAY.
ITS
OPERATES WITH THE TIMING AND BLOWER AND X1,X2 RELAY
LOCKOUT
PERIODS SHOWN.
NOTE: POWER MUST BE CYCLED TO ENTER OR TO LEAVE THE TEST MODE. THE
SELECTED STATE (TEST OR NORMAL OPERATION) BECOMES EFFECTIVE ONLY AFTER
POWER IS RESTORED.
Summary of Contents for MaxAir 100e P2
