AirLinkWiFi UltraSky CPE2, User Manual

Page: 48 / 62

48 / 62
4. Other
HT TxStream
: RF Transmit Stream. Default is 2 .
HT RxStream : RF Receive Stream. Default is 2 .
4.3.2 Advanced
Use the Advanced Setup page to make detailed settings for the Wireless.
Advanced Setup includes items that are not available from the Basic Setup page,
such as Beacon Interval, Control Tx Rates and Basic Data Rates.
1. Advanced Wireless
BG Protection Mode
: it is used to determine the state of BG Protected Mode.
It is helpful to successfully connect to the 11n wireless network of slower
wireless client ports in complex multi-modes. Default is
Auto .
Basic Data Rates : default is Default(1-2-5.5-11 Mbps) .
Beacon Interval : the interval of sending wireless beacon frame. In this time
range, beacon frame will be sent once to obtain access information of wireless
network in the vicinity. Default is
100 .
Data Beacon Rate (DTIM) : For different requirement, you can select one of
the suitable Basic Data Rates. Default is 1 .
Fragment Threshold : default is 2346 .