AirLinkWiFi UltraSky CPE2, User Manual

Page: 17 / 62

17 / 62
Multiple SSID : Set SSID for the Multiple AP.
Broadcast Network Name (SSID) : select to ban SSID of the AP broadcasts,
and then wireless client ports will be unable to scan to SSID of the AP. Only when
the client ports know SSID of the AP could they communicate with the AP. It is
activated by default.
AP Isolation : If activated, client within the SSID can not access one another,
which can prevent the spread of the virus in LAN.
MBSSID AP Isolation : it is isolated outside the AP. Other client ports that do
not belong to the AP can not access client ports within the AP.
BSSID : It is a 48bit identity used to identify a particular BSS (Basic Service Set)
within an area. In Infrastructure BSS networks, the BSSID is the MAC (Medium
Access Control) address of the AP.
Frequency (Channel) : make the wireless signals as transmission channels.
default is 2462MHZ(channel 11) .
2. Wireless Distribution System (WDS)
You can choose Disable , Lazy Mode , Bridge Mode , Repeater Mode . Default
is Disable .
Lazy Mode : in Lazy Mode, users do not need to fill BSSID of the other side.
WDS connection of the AP is as passive connection and it is only required the
other side to fill BSSID address of this AP. The effect is the same as that of
Bridge Mode.
Bridge Mode : in Bridge Mode, users are required to fill BSSID of AP of the other
side. SSID of local AP is shielded, which is only as an extension form of SSID of
Repeater Mode.
Repeater Mode : in Relay Mode, users are also required to fill BSSID of AP that
needs to connect. The local AP is as the core while other AP is as an extension
form of repeater.
Encryption Type : support three encryption types: WEP, TKIP and AES
Encryption Key : the encryption key between the input wireless devices
AP MAC Address : please enter the MAC address of wireless devices of the
opposite side.
3. HT Physical Mode
Operating Mode
: default is Mixed mode.
Channel BandWidth : Select wireless work frequency 20 or 20/40 . Default is
20/40 .
Guard Interval : default is Auto .
MCS : default is Auto .
Reverse Direction Grant(RDG) : default is Enable .
Extension Channel : default is 2442MHZ(channel 7) .
Aggregation MSDU(A-MSDU) : default is Disable .
Auto Block ACK : default is Enable .
Decline BA Request : default is Disable .