AirLinkWiFi UltraSky CPE2 User Manual Download Page 59

Page: 59 / 62

changing) IP-address.

Dynamic DNS Provider

: Select DDNS Provider.

Account

: Your registered Account from DDNS Provider.

Password

: Your registered password from DDNS Provider.

DDNS

: Your registered Domain name from DDNS Provider.

If you have changed the above settings, click “

Apply

” button Apply Settings.

4.6.2 Upload Firmware

Upgrade the new firmware to obtain new functionality.

It takes about 1 minute to upload upgrade flash and be patient please.
Caution! A corrupted image will hang up the system.

Update Firmware

: upgrade the system software of the AP. Select the correct

upgrade file and Click “

Apply

” .

4.6.3 Settings Management

You might save system settings by exporting them to a configuration file,
restore them by importing the file, or reset them to factory default.

Summary of Contents for UltraSky CPE2































































Search results

Summary of Contents for UltraSky CPE2

Reviews:

Related manuals for UltraSky CPE2

Brands by name

Popular brands

AirLinkWiFi UltraSky CPE2, User Manual

Search results

Summary of Contents for UltraSky CPE2

Reviews:

Related manuals for UltraSky CPE2

Brands by name

Popular brands