AirLinkWiFi UltraSky CPE2, User Manual

Page: 43 / 62

43 / 62
4.2.4 WDS
Wireless Distribution System Settings. In this mode, you can expand the scope
of network by combining up to four other access points together, and every
access point can still accept wireless clients.
You can choose Disable, Lazy Mode, Bridge Mode, Repeater Mode.
Lazy Mode : in Lazy Mode, users do not need to fill BSSID of the other side.
WDS connection of the AP is as passive connection and it is only required the
other side to fill BSSID address of this AP. The effect is the same as that of
Bridge Mode.
Bridge Mode : in Bridge Mode, users are required to fill BSSID of AP of the other
side. SSID of local AP is shielded, which is only as an extension form of SSID of
Repeater Mode.
Repeater Mode : in Relay Mode, users are also required to fill BSSID of AP that
needs to connect. The local AP is as the core while other AP is as an extension
form of repeater.
Encryption Type : support three encryption types: WEP, TKIP and AES
Encryption Key : the encryption key between the input wireless devices
AP MAC Address : please enter the MAC address of wireless devices of the
opposite side.
If you have changed the above settings, click “
Apply” button Apply Settings.
4.2.5 WPS
You could setup security easily by choosing PIN or PBC method to do Wi-Fi
Protected Setup. default is
Disable.