radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
❯
Reorient or relocate the receiving antenna.
❯
Increase the separation between the equip-
ment and receiver.
❯
Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
❯
Consult the dealer or an experienced radio/TV
technician for help.
2.8
Essential performance char-
acteristics
The ScanX Edge does not have any essential
performance characteristics as set out in
IEC 60601-1 (EN 60601-1) section 4.3.
The unit meets the requirements according to
IEC 60601-1-2:2014.
2.9
Notification requirement of
serious incidents
The operator/patient has to report any serious
incident related the product to the manufacturer
and the competent authority of the Member
State, in which the operator and/or patient is
established/resident.
2.10 Only use genuine parts
❯
Only Air Techniques accessories and special
accessories or those approved by Air Tech-
niques may be used.
❯
Only use original spare and replacement parts.
Air Techniques accepts no liability for
damage resulting from the use of non-
approved accessories, special acces-
sories or any parts other than original
spare and wear parts.
The use of non-approved accessories,
special accessories or non-genuine work-
ing parts / spare parts (e.g. mains cable)
can have a negative effect on the electri-
cal safety and EMC.
2.11
Transport
Only the original packaging ensures optimum
protection for the unit during transport.
If necessary, the original packaging for this unit
can be ordered from Air Techniques.
Air Techniques cannot be held responsi-
ble for any damage resulting from trans-
port in unsuitable packaging, even during
the warranty period.
❯
Only transport the unit in its original packaging.
❯
Keep all packaging away from children.
❯
Do not expose the unit to any strong vibrations
or shocks.
2.12
Disposal
Europe
An overview of the waste keys for Dürr
Dental products can be found in the
download area at www.duerrdental.com
(document no. P007100155).
Device
Dispose of the unit correctly. Within the
European Union, the unit must be dis-
posed of in accordance with EU Directive
2012/19/EU (WEEE).
❯
If you have any questions about the correct
disposal of parts, please contact your dental
trade supplier.
Phosphor storage plate
The image plate contains barium compounds.
❯
Dispose of the image plate properly in accor-
dance with locally applicable regulations.
❯
In Europe, dispose of the image plate in accor-
dance with waste code 090199 "Waste not
otherwise specified". Disposal as domestic
waste is not possible.
Important information
2160100287L41 1911V006
7
EN-
US
