2. System and Network Setup
WN-350R User’s Manual
90
RTS Threshold (2):
Set the RTS threshold of wireless radio. Do not
modify default value if you don’t know what it is,
default value is 2347.
Beacon Interval (3):
Set the beacon interval of wireless radio. Do not
modify default value if you don’t know what it is,
default value is 100.
DTIM Period (4):
Set the DTIM period of wireless radio. Do not modify
default value if you don’t know what it is, default value
is 3.
Data Rate (5):
Set the wireless data transfer rate to a certain value.
Since most of wireless devices will negotiate with
each other and pick a proper data transfer rate
automatically, it’s not necessary to change this value
unless you know what will happen after modification.
N Data Rate (6):
Same as above, but only for 802.11n clients.
Channel Width (7):
Set channel width of wireless radio. Do not modify
default value if you don’t know what it is, default
setting is ‘Auto 20/40 MHz’.
Preamble Type (8):
Set the type of preamble, do not modify default value
if you don’t know what it is, default setting is ‘Short
Preamble’.
Broadcast ESSID (9): Decide if the wireless router will broadcast its own
ESSID or not. You can hide the ESSID of your
wireless router (set the option to ‘Disable’), so only
people those who know the ESSID of your wireless
router can get connected.
Summary of Contents for WN-350R
Page 9: ......