4. Appendix
WN-350R User’s Manual
166
PPPoE:
Point-to-Point Protocol over Ethernet. Point-to-Point Protocol is a
secure data transmission method originally created for dial-up connections;
PPPoE is for Ethernet connections. PPPoE relies on two widely accepted
standards, Ethernet and the Point-to-Point Protocol. It is a communications
protocol for transmitting information over Ethernet between different
manufacturers
Protocol:
A protocol is a set of rules for interaction agreed upon between
multiple parties so that when they interface with each other based on such a
protocol, the interpretation of their behavior is well defined and can be made
objectively, without confusion or misunderstanding.
Router:
A router is an intelligent network device that forwards packets
between different networks based on network layer address information such
as IP addresses.
Subnet Mask:
A subnet mask, which may be a part of the TCP/IP information
provided by your ISP, is a set of four numbers (e.g. 255.255.255.0) configured
like an IP address. It is used to create IP address numbers used only within a
particular network (as opposed to valid IP address numbers recognized by the
Internet, which must be assigned by InterNIC).
TCP/IP, UDP:
Transmission Control Protocol/Internet Protocol (TCP/IP) and
Unreliable Datagram Protocol (UDP). TCP/IP is the standard protocol for data
transmission over the Internet. Both TCP and UDP are transport layer protocol.
TCP performs proper error detection and error recovery, and thus is reliable.
UDP on the other hand is not reliable. They both run on top of the IP (Internet
Protocol), a network layer protocol.
Summary of Contents for WN-350R
Page 9: ......
