7.
Setting
47
AirLive POE-260CAM User’s Manual
7.2.2 SNMP
Set the SMTP menu when you want to send an image via e-mail. By using Mail (SMTP)
function, you can send a mail with attached image which has been shot linked with the
external sensor input or with the built-in motion detection function. The image file can also
be sent periodically. E-mail (SMTP) setting menu is composed of three tabs,
General
,
Alarm sending
and
Periodical sending
.
7.2.2.1 General
Select On when you use the SMTP function. The common setting options are displayed
below. If you do not wish to use the e-mail (SMTP) function, select Off and click OK.
Note
：
During transmission of an image file via mail, the frame rate and operation
performance of the monitor image of the main viewer decline.
While the camera video mode is set to
MPEG4
, the image of the composite video
signal output from the video output connector of the camera may be distorted
during mail transmission.
You cannot send an audio file by using the mail sending function.
SMTP server name
：
Type the SMTP server name up to 64 characters, or the IP address
of the SMTP server.
Authentication
：
Select the authentication required when you send an e-mail.
