7.
Setting
31
AirLive POE-260CAM User’s Manual
Initialize
Reboot
：
Click this button to reboot the device. A confirmation dialogue will appear.
Click
OK
to proceed. It takes about two minutes to reboot the device.
Factory default
：
Click this button to reset the device to the factory default settings. A
confirmation dialogue will appear. Click
OK
to proceed
;
the network indicator on the
device will start to blink. After completing adjustments to the default settings, the
device will reboot automatically. Do not turn off the device until the device reboots.
Backup setting data
：
Save the setting data of the device to a file. Click
Save
, and
follow the instructions on the browser to save the setting data file to your specified
location.
Restore setting
：
Load the saved setting data of the device. Click
Browse
and select
the file in which the setting data is stored. Click
OK
, and the device is adjusted
according to the loaded data and restarted.
Firmware update
：
Upgrade the device software. Click
Browse
and select the file for
upgrading. A confirmation dialogue will appear. Click
OK
to start upgrading. The
device will reboot upon completion.
Note:
Use only upgraded files that are special for this device. Problems may occur
otherwise.
Do not turn off the device power or disconnect the network until the upgrading is
completed.
Upload language pack
：
Upgrade the device language pack. Click
Browse
and select
the file for upgrading. A confirmation dialogue will appear. Click
OK
to start upgrading.
The upgrade is applied immediately. The default language is “
English.
”
