8.
CamPro
Express
User’s
Manual
99
AirLive POE-260CAM User’s Manual
Sensor (Digital Input)
Many video gateways and LAN cameras has GPIO port. The digital inputs can be
connected to sensors, while digital outputs can be connecting to relay switches.
In System Setup tree, a sensor is represented by
(un-configured sensor) or
(configured sensor) icon, and relay switch is represented by
icon.
When you select a sensor in the System Setup tree, the toolbar becomes:
But the two buttons on the right will appear only after a sensor has been configured.
Sensor Setting
Click the [Sensor Setting] button to bring up the Sensor Setting dialog, as shown below:
Node: is the serial number of this sensor of the current device.
Location: give a meaningful name to this sensor.
Pattern: There are two kinds of sensor: General and Critical. General sensor can be
turned on or off by system administrator while critical sensor can not.
fault Status: can be normal open or normal close depend on the sensor type.
Enable: check this to activate the sensor.
Click [OK] to save the settings and leave this dialog.
Click [Apply] to save the settings of this sensor, and stay in this dialog to set the other
sensor nodes.
