8.
CamPro
Express
User’s
Manual
100
AirLive POE-260CAM User’s Manual
Remove Sensor
Click [Remove Sensor] to remove the selected sensor. You will be asked to confirm the
deletion.
Breach
The alarm actions are the same as those for LAN camera, with two additional alarm actions:
[Enable DI] and [Disable DI].
Relay (Digital Output)
Click the
button in the System Setup tree, the toolbar becomes:
The button on the right will only appear if you select a configured relay.
Relay Settings
Click [Relay Setting] button and the Relay Setting dialog will appear, as shown below:
Node: is the serial number of this relay on the current device.
Location: give a meaningful name for this relay.
Default Status: set the default status of this relay.
Click [Create] to save the configuration and leave the dialog, or click [Apply] to save the
configuration and continue to set another relay on the current device or modify current
setting.
Remove Relay
Click the [Remove Relay] button to remove the selected Relay. You will be asked to
confirm the deletion.
