GDMMBi²13-1G
Version 0010
28
Assemble the luff lines on the
pulley block (D255520)
. (Refer to drawing
OP10-26CA
.) The
doubled interior luff line,
luff line N°1 D207006
, should be placed in the groove of the front
pulley and the exterior luff line,
luff line N°2 D207007
, in the groove of the back pulley.
Figure 5-25.
Apply threadlock and gently tighten the connecting bolt,
screw CHC 6-30-10
(B063210)
.
Check that the pulley is free to rotate.
Attach luff lines N°1 to the straps that pass through the eyelets of the trailing edge by means
of the
stainless steel shackles
(I120310)
.
Attach luff lines N°2 to the straps of the lateral battens that pass through the eyelets by means
of the
stainless steel shackles
(I120310)
. (One shackle on each side of the straps.) Figure
5-26.
Figure 5-25
Figure 5-26
Do not apply threadlock on the shackles. Close & firmly tighten their nuts.
Check the position of the luff lines on the pulleys at the top of the king post; place them in
such a way that they do not cross.
9. Uprights
Check that the wing is still opened out fully.
Slide the Corset cord through the right A-frame upright and the plastic guides at their ends
.
Figure 5-27.
Assemble the upright upper bases
D257820,
to the
A-frame top
(D150410),
and to the hang
bracket on the keel. Refer to drawings
D150429, D150431
&
U028271-M060.
Apply threadlock and gently tighten the upright securing bolts,
screw BHC 8-63/13
(B086313).
Also tighten the main bolt,
screw CHC 10-125-15 (B112810).
As usual, do not over-tighten the bolts in order to allow rotation of the parts.
10. Wing Tensioning
Prepare the correct position of the sail and cables by pulling on the tensioning cables, then
releasing.
Check the straightness of all the wires onto their tangs and bolts and that they are not
obstructing the opening of the sail on the leading edges.
Tension the sail fully by pulling the goose-neck until it hooks on the screw on the rail at the
back of the keel, taking care to go through the
inside of the triangle formed by restraining
strap N° 1 of the central battens on the keel at the back of the king post
, then flatten the
goose-neck and secure it with the push-pin. Figure 5-28.
Summary of Contents for BioniX2 13
Page 42: ...GDMMBi 13 1G Version 0010 42...
Page 48: ......