GDMMBi²13-1G
Version 0010
47
7.2
Method for Folding the Sail
Caution: If the Mylar is still installed in the wing, avoid sharp creases in this
process or the Mylar may be damaged.
1 Put the wing flat on the ground, upper surface on top.
2 Take the right wing tip and fold it over the left wing tip.
3 Take the two wing tips and bring them on the nose of the wing.
4 Proceed with a second person. One stays at the leading edge, the other holding
down the inner surface panel. Fold the leading edge (which is stiffened by the
Mylar insert) onto the sail.
5 Take the keel pocket and fold it so that it lies parallel to the leading edge.
6 Take the rest of the wing trailing edge and fold it on the keel pocket.
7 At this stage, the wing looks like a rectangle. Fold this rectangle in 3 equal parts,
beginning from the nose.
8 Keep it folded with a fastening Velcro without tightening too hard. The Mylar of
the leading edge must not be broken.
Summary of Contents for BioniX2 13
Page 42: ...GDMMBi 13 1G Version 0010 42...
Page 48: ......
