GDMMBi²13-1G
Version 0010
31
Figure 5-31
Figure 5-32
18. CORSET
Refer to drawing
Y153020 & OP10-35CO
.
Reassemble the pulley blocks of the CORSET hoist. Check that all of the pulleys are perfectly
free to turn without friction. Figure 5-33.
Secure the CORSET pulley blocks to the central battens by means of the straps and stainless
steel loops and wrapping them around the central battens in the 3 openings made in the
pockets. Figure 5-34.
Figure 5-33
Figure 5-34
Lock the back right strap of the hoist on the central right batten by means of a
self-tapping
screw B1999010
. Figure 5-35.
Assemble & secure the pulley fitting of the CORSET fine cord on the hang point bracket by
means of the two
screws BHC 6-25 B062610
and the 2
nylon washers 6-14 B820610,
the 2
washers 6-13-2 B820510
and
the 4
washers 6-14-4 B820710
as indicated in drawings
OP10-
34CO &
U028271-M120
. Apply threadlock to the two fastening screws.
Do not over tighten
the fixing screw
BHC 6-20 B062110
of the pulley so that it can rotate freely.
Figure 5-36.
Summary of Contents for BioniX2 13
Page 42: ...GDMMBi 13 1G Version 0010 42...
Page 48: ......
