15
7.1.2 Preset Mode ( Angle)
Preset
mode enables you to quickly set the working torque plus angle
value by selecting a preset that you previously defined. It is also
convenient for repetitive work.
1. To set the tool to Preset mode, from the main tool screen, press key
to enter the Mode operation screen. Press key
again to enter the Mode
selection interface.
2. Press key
or
to toggle to Mode 3 Preset and select it by pressing
key
. This will return to the main Mode screen, which will display the
selected mode.
Mode Selection Interface
Key 1 toggles up, Key 3 toggles down
Select
highlighted
option
& return
to mode
screen
Key
2
Navigate
to Exit
screen
Key
1
Key
3
or
3. Press key
or
to navigate to the Exit screen, and press key
return
to the main tool screen, which will now display the Preset interface
showing the Torque/Angle that you defined as a preset. Instructions for
setting presets are given in “7.2 Preset” on p. 17.
Preset Interface
Key
1
Key
2
Key
3
Select previous
preset value
Current preset value
Select next
preset value
4. Select the Preset value in the main interface. Press key
to select the
previous
preset value set, and press key
to select the next preset value.
For example, the initial working value shown in the figure is 1001 Nm torque
+50° rotation angle. Press key
to select the previous preset, which in this
example is 850 Nm 35° rotation angle. Press key
to select the
next working value, which in this example is 1200 Nm 60° angle.
5. Once the value is set, the tool is ready to operate. Press the trigger to
start the motor.
Summary of Contents for AcraDyne ABETP Cordless XT Series
Page 12: ...12 6 Menu Relationships Key 1 Key 2 Key 3 ...
Page 54: ...54 NOTES ...
Page 55: ...55 NOTES ...
