Aimco AcraDyne ABETP Cordless XT Series Operation Manual Download Page 2

Page: 2 / 56

TABLE OF CONTENTS

1. General Safety Instructions . . . . . 3

1.1.1  General Safety . . . . . . . . . . . 3
1.1.2  Workplace Safety . . . . . . . . . 3
1.1.3  Electrical Safety.   .   .   .   .   .   .   .   .   .   4
1.1.4  Personal Safety . . . . . . . . . . 4
1.1.5  Battery Safety . . . . . . . . . . . 4
1.1.6  Tool Safety  . . . . . . . . . . . . . 5

2. ABETP Operation Statement. . . . . 6

2.1 Use and Maintenance of

Battery Tools . . . . . . . . . .6

2.2 Service. . . . . . . . . . . . . . 7

3. Tool Introduction . . . . . . . . . . . . 7

3.1 Tool Specifications . . . . . . . 7

4. Tool Features . . . . . . . . . . . . . . 8

4.1 Tool Description. . . . . . . . .8

4.2 Tool Diagram . . . . . . . . . .8

4.3 Workflow. . . . . . . . . . . . .9

4.4 Mechanical Operation . . . . . .9

5. Operational Interface . . . . . . . . . 10

5.1 Main Interface . . . . . . . . . 10

5.1.1 Key Description . . . . . . . . . .10
5.1.2 Icon Descriptions . . . . . . . . .10

5.2 Menu Selection . . . . . . . . .11

5.3 Error Icons. . . . . . . . . . . .11

6. Menu Relationships . . . . . . . . . . 12

7. Tool Settings . . . . . . . . . . . . . . 13

7.1 Mode . . . . . . . . . . . . . . 13

7.1.1  Torque Mode . . . . . . . . . . . .14
7.1.2  Preset Mode ( Angle) .15
7.1.3  Angle Mode . . . . . . . . . . . . .16

7.2 Preset . . . . . . . . . . . . . 17

7.3 Info. . . . . . . . . . . . . . . 19

7.4 Log . . . . . . . . . . . . . . . 20

7.5 Admin . . . . . . . . . . . . . 21

7.5.1 Span  . . . . . . . . . . . . . . . . 22
7.5.2 Calibration  . . . . . . . . . . . . 22
7.5.3 Unit . . . . . . . . . . . . . . . . .  28
7.5.4  Reverse Angle . . . . . . . . . .  29
7.5.5  Forward Speed.   .   .   .   .   .   .   .   .   .   29
7.5.6 Safe-Limit.   .   .   .   .   .   .   .   .   .   .   .   .   30
7.5.7 Language

. . . . . . . . . . . . . .31

7.5.8 DateTime . . . . . . . . . . . . . .31
7.5.9  Battery Selection . . . . . . . .  32
7.5.10  Res Display Time . . . . . . . .  32
7.5.11 Recheck . . . . . . . . . . . . . .  32
7.5.12  Check Point.   .   .   .   .   .   .   .   .   .   .   .   34
7.5.13 Exit . . . . . . . . . . . . . . . . .  34

7.6 WiFi . . . . . . . . . . . . . . 34

8. Tool Operation . . . . . . . . . . . . .35

8.1 Charging the Battery . . . . . 35

8.2 Installation and Removal of

Lithium Battery . . . . . . . . 35

8.3 Preheating the Motor . . . . . 35

8.4 Installation of Reaction Bar . 36

8.4.1  Reaction Bar Guidelines.   .   .   .   36
8.4.2 Sockets  . . . . . . . . . . . . . . .37
8.4.3  Pinch Point . . . . . . . . . . . . .37
8.4.4  Installation Procedure . . . . .   38

8.5 Starting the Tool . . . . . . . 39

8.6 Fwd / Rev / Lock Switch . . . 40

8.7 Recovery. . . . . . . . . . . . 40

9. Battery and Battery Charger . . . . . 41

9.1 Battery . . . . . . . . . . . . 41

9.2 Battery Charger . . . . . . . . 42

9.2.1. Charging.   .   .   .   .   .   .   .   .   .   .   .   .   .   42
9.2.2.  Charging Complete.   .   .   .   .   .   .   42
9.2.3.  Charging Failure.   .   .   .   .   .   .   .   .   43

10. Troubleshooting . . . . . . . . . . . .44

11. Software . . . . . . . . . . . . . . . . .45

11.1 Installing the Software . . . . 45

11.2 Connecting the Tool . . . . . 46

11.3 Main Software Menu . . . . . 47

11.3.1  Setting Interface  . . . . . . . .  48
11.3.2  Log Interface .   .   .   .   .   .   .   .   .   .   .   50
11.3.3  Upgrade Interface  . . . . . . . .51

12. Tool Warranty . . . . . . . . . . . . . .52

Summary of Contents for AcraDyne ABETP Cordless XT Series

























































Search results

Summary of Contents for AcraDyne ABETP Cordless XT Series

Reviews:

Related manuals for AcraDyne ABETP Cordless XT Series

Brands by name

Popular brands

Aimco AcraDyne ABETP Cordless XT Series, Operation Manual

Search results

Summary of Contents for AcraDyne ABETP Cordless XT Series

Reviews:

Related manuals for AcraDyne ABETP Cordless XT Series

Brands by name

Popular brands