16
7.1.3 Angle Mode
Angle mode allows you to directly set the exact, required degrees of angle
rotation.
1. To set the tool to Angle mode, from the main tool screen, press key
to enter the Mode operation screen. Press key
again to enter the
Mode selection interface.
2. Press key
or
to toggle to Mode 5 Angle and select it by pressing
key
. This will return to the main Mode screen, which will display the
selected mode.
Mode Selection Interface
Key 1 toggles up, Key 3 toggles down
Select
highlighted
option
& return
to mode
screen
Key
2
Navigate
to Exit
screen
Key
1
Key
3
or
3. Press key
or
to navigate to the Exit screen, and press key
return
to the main tool screen, which will now display the Angle interface.
Angle Interface
Increase value
Decrease value
Key
1
Key
2
Key
3
4. Set the rotation angle in the main interface. Press key
to increase the
angle value, and press key
to decrease the angle value. Holding the
key button down will speed up the scrolling.
5. Once the value is set, the tool is ready to operate. Press the trigger to
start the motor.
Summary of Contents for AcraDyne ABETP Cordless XT Series
Page 12: ...12 6 Menu Relationships Key 1 Key 2 Key 3 ...
Page 54: ...54 NOTES ...
Page 55: ...55 NOTES ...
