Aimco AcraDyne ABETP Cordless XT Series Operation Manual Download Page 6 | Manualshive

Page: 6 / 56

background image

6

2. ABETP Operation Statement

1. The ABETP torque wrench is used for final tightening applications.

The operator shall formulate inspection and operation regulations to
ensure the tightening quality through reasonable use specifications.
If the operator fails to use the equipment through reasonable use
specifications, resulting in abnormal working results of the equipment,
the equipment shall not bear relevant responsibilities.

2. The operator shall be trained and qualified before using the tool. The

operator shall understand the dangers associated with a reaction arm.
If users who are unfamiliar with tool instructions and safety measures
operate the tool and cause personal and property losses, the user shall
bear the corresponding responsibility, and the company shall not bear
any responsibility.

3. The operator shall adhere to all electrical safety measures when using

the equipment to avoid casualties caused by electric shock. If the
operator fails to work in the proper working environment and causes
personal property loss, the company will not bear any responsibility.

4. When using the equipment, the operator shall ensure that his / her body

is in normal working condition. The company shall not be liable for any
damage or personal property loss caused by an operator who is in a
compromised physical state, such as drunk or fatigued.

5. If the equipment fails, stop use immediately. If the user continues

to operate the equipment under the condition of known failure and
causes personal and property losses, the company shall not bear any
responsibility.

6. The equipment does not support any tightening work beyond the

working scope of the equipment. The company will not bear any
responsibility for any loss caused by using a reaction arm.

2.1 Use and Maintenance of Battery Tools

1. Use the electric torque wrench according to the correct operation

method.

2. Disconnect the battery before replacing accessories or performing

maintenance. This preventive measure can reduce the risk of
unexpected tool start-up.

3. Keep the tool away from children and do not let unqualified personnel

use the tool. Battery tools are dangerous in the hands of untrained
people.

«
...
4
5
6
7
8
...
»

Summary of Contents for AcraDyne ABETP Cordless XT Series

























































Reviews:

No comments

Related manuals for AcraDyne ABETP Cordless XT Series

Brand: Makita Pages: 13

Brand: Jet Pages: 14

Brand: Parkside Pages: 78

Brand: Van's Aircraft Pages: 217

Brand: TAAG Pages: 5

Brand: Marson Pages: 6

BiDi-Power Series

Brand: tams elektronik Pages: 16

Brand: KEPCO Pages: 2

Brand: Image Industries Pages: 32

Brand: Campbell Hausfeld Pages: 4

Brand: Magnetek Pages: 20

Brand: Himax Pages: 2

Brand: Ryobi Pages: 8

Brand: Westfalia Pages: 20

KF**-CRG2-1.D Series

Brand: Pepperl+Fuchs Pages: 38

Brand: Conrad Pages: 3

Brand: VOLTCRAFT Pages: 8

Brand: Sump Saver Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands