Aim SmartyCam 3 Dual, User Manual

Page: 5 / 48

5
A lot of graphic controls
Choose your preferred layout for keeping your data under control
Secondary Camera (SmartyCam 3 Dual only)
Using Race Studio 3 software (supported from release 3.53.xx
onward) you can place the video coming from the second camera
where you prefer on the video, exactly as if you were adding any
graphic control.
Auto start/stop recording
Avoid thinking at the camera while ready at the start/finish line.
Automatic track selection
SmartyCam 3 may work connected to an AiM Logger or in a standalone installation: in the first case, it receives the track selected by the
logger, while in the second case it automatically selects the proper track using the information coming from the GPS Module. In this way, it
can draw the map and calculate lap number, lap times and rolling times.
Video and data in the same file
Your video and the most important data in the same MP4 file.
Video Output (SmartyCam 3 Dual only)
SmartyCam 3 Dual features a Video output that can connected to an external video streamer.
Automatic data and video synchronization
The data recorded in the MP4 file are only the data that the
SmartyCam 3 receives: In case they are not enough for your
analysis, simply import into Analysis 3 both the video file and the
data from your AiM logger and the software will automatically
synchronize them: position on the track, video frame and data on
the graph will be perfectly correlated