Aim SmartyCam 3 Dual, User Manual

Page: 11 / 48

11
4.3 – LEDs working mode (SmartyCam 3 dual only)
SmartyCam 3 dual features three front LEDs labelled as follows:
•
PWR/CHN (Power/Charge) on top
•
DATA central
• STATUS bottom
Their appearance change according to the message they are giving
PWR/CHG LED
• Off : external power not available
• Blinking Red : external power available and battery charging
• Solid Red : external power available and battery fully charged
DATA
This LED indicates the status of the connection of the two available CAN busses (CAN1 and CAN2) as follows:
• OFF
: no data traffic, no Ethernet connection and no USB connection detected
•
 Blinking Green: non data traffic but ethernet connection detected
•
 Blinking Blue: non data traffic detected but USB connection
•

Blinking Cyan: non data traffic detected but ethernet and USB connection detected
•

Solid Green: data traffic available on CAN1 but not available on CAN2
•

Solid Blue: data traffic available on CAN2 but not available on CAN1
•

Solid Cyan: data traffic available on both CAN1 and CAN2
•

Solid Red: mandatory data traffic is missing on either CAN1 or CAN2 interface: the failure status is determined by the current
camera configuration
Please note:
timeout condition on either CAN bus interface triggers after no data is continuously detected for 5 seconds
STATUS
•

Solid Red: camera powered but unable to record data
•
 Solid Blue: camera ready to start recording
•

Solid Green: camera currently recording