Aim SmartyCam 3 Dual, User Manual

Page: 12 / 48

12
5 – SD card management
SmartyCam 3 can support up to 2 TB cards. SmartyCam 3 Sport supports Micro SD only while SmartyCam 3 Dual supports SD.
For the SD to
correctly communicate with Race Studio 3 software you need to insert the card in SmartyCam 3 slot before inserting it in the PC slot
. The
(Micro) SD is used not only to store video recorded by the camera but also to load the configuration and the firmware to the camera (see
paragraph 6.4 for further information).
For both cameras the housing is closed by a plastic thumb screw. To open it press and turn the plastic thumb screw clockwise as written on
the camera and shown here below. To close the door, firmly shut the flap and press in the thumbscrew then turn it counter clockwise. If
SmartyCam 3 Sport is powered a steady red light is shown when the flap is open.