24
7.4.1 – Firmup
SmartyCam 3
can update their firmware through the (Micro) SD:
•
insert the (Micro) SD in SmartyCam 3 slot and switch the camera on so that Race Studio 3 will correctly communicate with it.
•
remove the card from SmartyCam 3 and insert it in the PC Slot
•
run Race Studio 3 and navigate to the top right “web updates” cloud icon
•
If there is a new SmartyCam 3 firmware check mark it and click “download”
•
the software detects SmartyCam 3 (Micro) SD and – as you click “update device” – loads the firmware on it
•
replace the (Micro) SD in its slot in SmartyCam 3 and switch the camera on
•
follow this path MENU >> FIRMUP
•
the camera shows the available firmware releases
•
Select the one you want to install and wait; in a few moments the camera will reboot and the new firmware is installed.
SmartyCam 3 Dual
can update the firmware also through the Ethernet or USB-C connection: connect SmartyCam 3 Dual to the PC using
the proper cable:
•
run Race Studio 3 and navigate to the top right “web updates” cloud icon
•
If there is a new SmartyCam 3 firmware check mark it and click “download”
•
once the firmware downloaded click “update device” and wait; in a few moments the camera will reboot and updated.
7.4.2 – Tracks update
Please refer to paragraphs 6.2.1 and 7.5.
Summary of Contents for SmartyCam 3 Dual
