23
7.3.14 – Info
The information here shown are important in case you need help from AiM Support Team. “Restore Info” page tells you which firmware
release will be restored if you decide to perform a factory reset.
7.4 – Update
It allows to update:
•
Firmware version
•
Configuration (the overlay transmitted to SmartyCam3
Sport/Dual; the camera can load one configuration at a time only)
•
Tracks
Updating can be performed in three ways:
•
exporting them to the (Micro) SD through AiM RaceStudio 3
software and loading them to SmartyCam 3
•
through the Ethernet or USB-C connection (
SmartyCam 3 Dual
only
).
Summary of Contents for SmartyCam 3 Dual
