2. Installation
ANET1553-x
User’s Manual
4
Figure 2.1-1 BSP Setup
4. Once the Setup Application has been started, step through the install wizard
to complete the installation.
You will be given the opportunity to choose the directory where the BSP is to
be installed. Default locations can also be used.
The BSP installation will result in the creation of the following Program Folder icon:
Start | All Programs | AIM GmbH | MIL-STD-1553 Windows
BSP 12.x.y
The AIM GmbH sub-directory will be located by default in the directory C:\Program
Files\. The Program Files directory is located on the drive which was chosen during
BSP installation.
Summary of Contents for ANET1553 Series
