3. Getting started
ANET1553-x
User’s Manual
15
3.5 Configuring basic properties
Click on the ‘General Settings’ tab in the navigation bar. You can now set an alias name for
the device or change the password for configuration access:
Figure 3.5-1 ANET Web Configuration Tool
“General Settings”
Note:
When changing the alias name the ANET1553
can’t be accessed by the former alias
name anymore. Make sure to adapt your applications to the new alias name.
The default alias is ANET1553-<x>, x= Serial Number.
3. Getting started
ANET1553-x
User’s Manual 15
Note:
It is recommended to change the pa
ssword (default = “aim”) when using the
ANET1553 module the first time.
3.5.1 Setting the IP-Address
Click on the
Network Settings
tab in the navigation bar. You will now see a page where
you can set either a static or dynamic (DHCP) IP address and choose a board alias.
When selecting static configuration, you will also be able to enter the subnetmask and
default gateway for your network
:
Figure 3.5-2 ANET Web Configuration Tool
“Network Settings”
Summary of Contents for ANET1553 Series
