Aim ANET1553 Series, User Manual, Page: 27 / 72

3. Getting started
ANET1553-x
User’s Manual
17
Figure 3.5-3 ANET Wireless Network Device Configuration
Example: Setting up a wireless access point on Windows 8.x devices
Devices running with a Microsoft Windows 8.x Operating System and featuring a Wi-Fi
device can be used to create a wireless access point. The ANET1553 device can join
this network. So it is possible to control the ANET1553 device with the Windows based
host device over the wireless connection.
The setup of the wireless access point needs to be done via the Windows
‘
netsh
’
command interpreter since the setup is no longer possible via the Windows 8.x GUI due
to network safety reasons.
Following steps
outline the necessary ‘
netsh
’
commands for the setup and configuration
of a hosted network on a Windows 8.x based host.